Thursday, August 27, 2020

REVIT Shortcuts

Revit shortcuts details

 REVIT Shortcuts

REVIT title image



Revit shortcuts are the master card of REVIT. There are lot more shortcut keys available for REVIT.    The REVIT Shortcuts ate following :- 

ANNOTATE :-


    DI = ALIGNED DIMENSION / Creates an aligned dimension.
    DL = DETAIL LINE / Creates view-specific lines.
    EL = SPOT ELEVATION / Displays the elevation of a selected point.
    RT = TAG ROOM; ROOM TAG / Tags the selected room.
    TX = TEXT / Adds text.


ANALYZE :-


    AA = ADJUST ANALYTICAL MODEL / Adjusts the analytical model of the structural member in                 relation to those of the elements to which it joins.
    LD = LOADS / Applies point, line and area loads to a model.
    LO = HEATING AND COOLING LOADS / Prepares a heating and cooling load analysis report                        based on an existing building model.
    PS = PANEL SCHEDULES / Generates a panel schedule for a specific panel.
    RA = RESET ANALYTICAL MODEL / Restores the analytical model alignment methods to
                auto-detect.


ARCHITECTURE :- 


    CL = COLUMN; STRUCTURAL COLUMN / Adds a vertical load-bearing element to the building                 model.
    CM = PLACE A COMPONENT / Place a component.
    DR = DOOR / Adds a door to the building model.
    LL = LEVEL / Places a level in view.
    RM = ROOM / Creates a room bounded by model elements and separation lines.
    RP = REFERENCE PLANE / Creates a reference plane using drawing tools.
    WA = WALL; WALL:WALL: ARCHITECTURAL / Creates a non-bearing wall or a structural wall                     in the building model.
    WN = WINDOW / Places a window in a wall or skylight in a roof.


CONTEXT MENU :-

     MP = MOVE TO PROJECT / Move the model relative to a shared coordinate system.
    RA = RESTORE ALL EXCLUDED / Restores all excluded parts and elements.
    SA = SELECT ALL INSTANCES: IN ENTIRE PROJECT / Selects all of the elements that are                         similar to the selected element in the current view, or throughout the project.
    

MODIFY :- 


    MV = MOVE / Moves a selected element.
    MM = MIRROR - PICK AXIS / Reverses the position of a selected model element, using a selected                 line as the mirror axis.
    OF = OFFSET / Moves a selected model line, detail line, wall, or beam a specified distance                             perpendicular to its length.
    PT = PAINT / Opens the Paint tool.
    RE = SCALE / Resizes the selected element.
    RC = COPE:REMOVE COPING / Removes coping.
    RP = REFERENCE PLANE / Creates a reference plane using drawing tools.
    SL = SPLIT ELEMENT / Cuts an element (such as a wall or line) at a selected point.
    TR = TRIM/EXTEND TO CORNER / Trims or extend one or more elements to form a corner.















Information Civil

Author & Editor

Thank you for go through this Article. If any kind of doubt, Fill free to make a querry. Contact us for further Information. We are always stand beside you in your every querries.

0 comments:

Post a Comment